Wulftec was the first in North America to put AC variable frequency drives as standard equipment on all machines. Why? Lower maintenance and better reliability—Wulftec stretch wrappers will save time and money
NEMA 4/12 control panel dust tight and waterproof
The control panel is neatly organized eliminating time otherwise lost searching for wires
The control panel is UL508A approved
Superior Electrical/Electronic Design including Allen Bradley MicroLogix PLC and AC drives
All motors, proximity sensors, photoeyes and other sensors have quick disconnect cables that simplify installation and maintenance
All Wulftec structures are made of heavy-duty steel for rugged performance, even in the harshest work environments. They’re built to last forever
A 25″ ring gear with pinion gear drive provides the strongest drive in the industry and is warranteed for 10 years.
Dual chain driven for balanced movement & no vibration
The “Maintenance Free” spring loaded carriage gate equipped with spring loaded rollers, ensures optimal contact with the stretch film year after year, without involving maintenance
Wulftec is the only manufacturer to offer a LIFETIME warranty on its pre-stretch rollers’ blue compound.
Preset pre-stretch ratios are available from 50-300%
The angled carriage with very low wrap possibility, the product is properly secured to the pallet, resulting in a pallet that is more stable for transport, and therefore less damage
No film threading is required and a Lexan cover eliminates operator’s ability to reach rollers when gate is closed
The pneumatically operated cut and wipe-on system automatically cuts and wipes the film onto the load upon cycle end
A vertical roller positions the film over the clamp which grabs the film; this ensures longer heat wire life expectancy
Then the heat wire swings in and cuts the film
A timed impulse heat control, allows quick cool down so the heat wire becomes cold to the touch within 5 seconds
Wulftec’s revolutionary drop away clamp ensures clean film release from the pallet load
Benefit from our splash proof program with the top cover pause
Non-Proprietary parts accessible on a local base
The best warranties in the industry
4-year unlimited cycle warranty
lifetime warranty on prestretch rollers
10-years on the steel structure and ring gear
Production Rate
50 loads per hour
Machine Dimensions
165.50″ L x
130″ W x
117.50″ H
Maximum Load Size
56″ L x
56″ W x
80″ H
Load Weight
Unlimited
Approximate Shipping Weight
2500 lbs
Electrical Requirements
120 V /
1 ph /
60Hz
15A
Air Requirements
3 cfm @
80 psi
Controls
Allen Bradley MicroLogix 1200 PLC
24V control system
Current overload protection
NEMA 4/12 control cabinet (can be located up to 10′ from machine frame)
Autoheight sensing photoeye
Power on/off switch and status light
Start/stop push button
Large emergency stop (push / pull type)
Manual carriage up/down function
Variable rotary arm speed (12RPM)
Separate up and down carriage speeds
Separate top and bottom wrap selectors
Reinforced wrap/manual rotation control
Positive arm alignment controlled by proximity sensor
Top cover pause switch (Splash proof program)
Spiral up or spiral up/down switch
Film force to load control
Emergency stop sensor for arm path obstruction
Mode switch (Manual or Automatic)
Pull cord with 40′ of cable (to be installed by customer)
Separate station on front of tower with clamp jog and an additional e-stop
Lack of film alarm
Structure
Heavy duty structural steel construction
10″ Square tubing column
Floor mounting integrated design with 10 anchor points
Easy access to all components
Anchoring Requirements
Wulftec recommends using heavy-duty expansion shields of 3/4″ diameter thread size with a minimum anchor depth of 4″ in concrete. To be I-beam (6″ to 8″) mounted, there are 2 anchors at the bottom and also 2 bolts on the top of the machine frame.
Film Delivery System
20″ NO-THREAD® Powered Pre-Stretch Carriage
1 HP AC motor with Allen Bradley variable frequency drive
Lifetime warranty on pre-stretch rollers blue compound
Film force release for easy pull at start and end of cycle
50-400% pre-stretch ratio (preset to customer spec, Std 200%)
Electronic film tension control with analog sensor
Lexan roller cover for operator safety
Angled carriage to wrap approximately 2″ from floor level
Proximity sensor on carriage gate to ensure gate is properly closed
Film Carriage Drive
1 HP AC motor with Allen Bradley variable frequency drive
Two #50 carriage lifting chains
Dual 1/2″ CRS ways with UHMW-PE carriage glides
Dual structural steel supporting boom
Power track for efficient guiding of wires
Film Tail Treatment
Automated Cut/Clamp & Wipe system
Pulse controlled cutter
Film alignment arm & Brush on film tail treatment
Rotary Arm Drive
Heavy duty 25″ ring gear with pinion gear drive
1 HP AC motor with Allen Bradley variable frequency drive
0-12 RPM variable speed
Electronic soft start/stop
Positive arm alignment controlled by proximity sensor
Protection guard over the ring gear
Technical Information
The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & Installation instructions